Образцы оборудования разработанного Управлением автоматизации и электропривода ЗАО Союзлесмонтаж, изготовляемого по заказам потребителей.

LED lamp of outside lighting ССНО-80, 10400 Lm, 80 Вт, 220 В AC/DC

светодиодный светильник наружный

Advantages of the LED lamp

Low price
High light efficiency 130 Lm / 1 Wt
Low power consuming: ССНО 80 Вт = РКУ с ДРЛ 250 Вт
Wide temperature range -40....+40 °С
Longevity - period of maintenance of 10-15 years
Safety, environmental friendliness of maintenance and utilization

The improved range of radiation
Electrical efficiency and electrical power factor =1,0
Trouble-free operation in supply voltage broad range
The powerful heat sink provides an optimum operation mode of LEDs
Possibility of control of a luminous flux and power consuming
The instantaneous switching on and output on a mode
The simple organization of abnormal lighting with self-contained supply
Payback period of ready system of lighting of 2-5 years
Guaranty period of maintenance of 2 years

Application field of the LED lamp outside

Outside (street lighting)
Production and warehouse (suspension height more З meters)
Architectural illumination of facades
Illumination of displays

Automobile digital charger of accumulator batteries

On capacities of a site of automation and the electric drive of JSC Soyuzlesmontazh the digital device for a charge of accumulator batteries is made.

Purpose of the charger

The device charging is intended for a charge and подзаряда automobile, and as all other types of accumulator batteries with rated voltage of 12 Volts.

Advantages of a digital car charger

It is enough to tell that the instrument can be carried permanently in a glove compartment of the car and thus to have possibility at any time to use of.

The welding inverter (the invertorny welding device) with the increased protection against environment

welding device

Description of the welding device

Welding device ИПСД-200-220-р (power supply of a welding arch) – the small-sized welding device of invertorny type is intended for welding by a piece electrode of products from low-carbonaceous staly, and also for welding alloyed staly (at application of the corresponding electrodes). Besides, it with success can be used for welding by not melting electrode in the environment of protective gases (argonodugovy welding) in a set with a special torch (it was tested with a torch АГНИ-18м with diameter of an electrode of 2 and 3 mm) at arch ignition by a contact mode.

Блок динамического торможения

Назначение

быстрая и точная остановка приводного механизма с заданной интенсивностью и временем.

Область применения

любое технологическое оборудование, где по требованию техники безопасности или технологического режима необходима быстрая и точная остановка системы электропривода.

Применение блока динамического торможения ( БДТ) позволяет: